DYMAT 2015 11 th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading 1 st Announcement Call for Abstract & Peer Reviewed Papers Palazzo dei Congressi, Lugano September 7 th – 11 th , 2015 Lugano, Switzerland Chairman: Ezio Cadoni www.dymat2015.org Conference Committee Prof. Dr. N. Bahlouli, Université de Strasbourg, France Dr. E. Buzaud - CEA, Gramat, France Prof. Dr. E. Cadoni, SUPSI - University of Applied Sciences of Southern Switzerland, Switzerland Prof. Dr. J. Cirne, Universidade de Coimbra, Portugal H.D.R. Dr. H. Couque, Nexter Munitions, Bourges, France Dr. D. Eakins, Institute of Shock Physics, Imperial College London, United Kingdom Prof. Dr. Pascal Forquin, Université Joseph Fourier, France Prof. Dr. S. Hiermaier, Fraunhofer Institute for High-Speed Dynamics, Ernst-Mach-Institut, EMI, Germany Prof. Dr. L. Kruszka, The Jaroslaw Dabrowski Mili- tary University of Technology, Warszawa, Poland Prof. Dr. V.-T. Kuokkala, Tampere University of Technology, Finland Dr. F. Llorca, CEA, Is sur Tille, France Prof. Dr. Magnus Langseth, Norwegian University of Science and Technology, Norway Prof. Dr. Francisco Galvez, Universidad Politecnica de Madrid, Spain Prof. Dr. E. Markiewicz, Université de Valenciennes, France Prof. Dr. P. Viot, Arts et Métiers ParisTech, France Dr. S. M. Walley, University of Cambridge, United Kingdom International Advisory Committee Prof. Dr. Y. L. Bai, Chinese Academy of Sciences, China Prof. Dr. M. Bolduc, DRDC-Valcartier, Canada Prof. Dr. A. Bragov, Research Institute of Mechan- ics, State University, Russia Prof. Dr. T. Cloete, University of Cape Town, South Africa Prof. Dr. J. Ananda Epaarachchi, University of Southern Queensland, Australia Prof. Dr. G. Gray III, Los Alamos National Labora- tory, USA Prof. Dr. H. Kobayashi, Osaka University, Japan Prof. Dr. B. Lundberg, Uppsala University, Sweden Dr. V. Mentl, Skoda Research Ltd., Pilsen, Czech Republic Prof. Dr. M. A. Meyers, University of California San Diego, USA Prof. Dr. S. de Neves Monteiro, Centro de Ciência e Technolo- gia, Rio de Janeiro, Brasil Prof. Dr. D. Rittel, Faculty of Mechanical Engineering, Israel Prof. Dr. J. Weerheijm, TNO Defence, Security & Safety, Netherlands Contact DynaMat Laboratory SUPSI Campus Trevano 6952 Canobbio, Switzerland www.supsi.ch Conference Organization Prof. Dr. Ezio Cadoni DYMAT Vice-President Phone +41 58 6666 377 [email protected]
Transcript
DYMAT 201511th International Conference
on the Mechanical and Physical Behaviour
of Materials under Dynamic Loading
1st Announcement Call for Abstract & Peer Reviewed PapersPalazzo dei Congressi, Lugano September 7th – 11th, 2015Lugano, Switzerland
Chairman: Ezio Cadoni www.dymat2015.org
Conference CommitteeProf. Dr. N. Bahlouli,Université de Strasbourg, France
Dr. E. Buzaud - CEA,Gramat, France
Prof. Dr. E. Cadoni,SUPSI - University of Applied Sciences of SouthernSwitzerland, Switzerland
Prof. Dr. J. Cirne,Universidade de Coimbra, Portugal
H.D.R. Dr. H. Couque,Nexter Munitions, Bourges, France
Dr. D. Eakins,Institute of Shock Physics,Imperial College London, United Kingdom
Prof. Dr. Pascal Forquin,Université Joseph Fourier, France
Prof. Dr. S. Hiermaier,Fraunhofer Institute forHigh-Speed Dynamics,Ernst-Mach-Institut, EMI, Germany
Prof. Dr. L. Kruszka,The Jaroslaw Dabrowski Mili-tary University of Technology, Warszawa, Poland
Prof. Dr. V.-T. Kuokkala,Tampere Universityof Technology, Finland
Dr. F. Llorca, CEA, Is sur Tille, France
Prof. Dr. Magnus Langseth, Norwegian Universityof Science and Technology, Norway
Prof. Dr. Francisco Galvez,Universidad Politecnicade Madrid, Spain
Prof. Dr. E. Markiewicz,Université de Valenciennes, France
Prof. Dr. P. Viot,Arts et Métiers ParisTech, France
Dr. S. M. Walley,University of Cambridge,United Kingdom
International AdvisoryCommitteeProf. Dr. Y. L. Bai,Chinese Academy of Sciences, China
Prof. Dr. M. Bolduc,DRDC-Valcartier, Canada
Prof. Dr. A. Bragov,Research Institute of Mechan-ics, State University, Russia
Prof. Dr. T. Cloete,University of Cape Town,South Africa
Prof. Dr. J. Ananda Epaarachchi, University of Southern Queensland, Australia
Prof. Dr. G. Gray III,Los Alamos National Labora-tory, USA
Prof. Dr. H. Kobayashi, Osaka University, Japan
Prof. Dr. B. Lundberg,Uppsala University, Sweden
Dr. V. Mentl, Skoda Research Ltd., Pilsen, Czech Republic
Prof. Dr. M. A. Meyers,University of California San Diego, USA
Prof. Dr. S. de Neves Monteiro, Centro de Ciência e Technolo-gia, Rio de Janeiro, Brasil
Prof. Dr. D. Rittel,Faculty of Mechanical Engineering, Israel
Prof. Dr. J. Weerheijm,TNO Defence, Security & Safety, Netherlands
DYMATDyMAT is an international association for the promotion of research into the dynamic behaviour of materials and its applications. Every three years, an international conference is organized by DyMAT. The last conference took place in Freiburg, Germany (2012). The next conference will take place in Lugano, Switzerland (7-11 September 2015). It is organized in collaboration with the DynaMat Laboratory of the SUPSI- University of Applied Sciences and Arts of Southern Switzerland.
ObjectiveThe objective of the triennial international DyMAT conferences is to create a forum where people involved in scientific research or industrial applications related to the dynamic behaviour of materials can meet and discuss results and ideas by means of a series of presentations (oral and poster) and a small-scale technical exhibition. Delegates from all nations, European as well as non-European, are invited to attend the conferences and to make contributions.
TopicsThe topics presented at the DyMAT conferences cover theoretical, numerical and experimental approaches to the various methods used to study the mechanical and physical behaviour of metals ceramics polymers and composites at high strain rates. People are also invited to present work based on specific industrial applications (the dynamic behaviour of materials is relevant in a multitude of situations ranging from automobile crashes and terminal ballistics to space exploration).As well as the traditional DyMAT conference themes, the organizers of DyMAT 2015 would also like to have two special sessions, the first one covering novel experimental techniques, the second one dealing with practical applications related to biomechanics.
Conference VenueThe DyMAT 2015 conference will be held in Lugano at the “Palazzo dei Congressi” Conference Center. Lugano is located in the italian speaking southern Canton of Switzerland, situated at the border with ltaly. lts special geographical position and warm welcome always displayed towards foreigners make Lugano a truly cosmopolitan city. Lugano is easily accessible by car, train and plane.
PublicationAs in the previous conference there are two pub-lication options for the 11th International DyMAT Conference:
1) Contibutions of up to 6 pages to the pro-ceedings book which will be published in the well-known DyMAT format by the European Physical Journal - Web of Conference (EPJ – WoC - ISSN: 2100-014X)
2) Peer-reviewed original papers to specifically dedicated thematic volume of the European Physical Journal – Special Topics (EPJ ST, Impact factor 2012: 1.796, ISSN 1951-6355). The original paper (max 35 papers) can either be a 5-10 pages contribution or a 3-5 pages short study
All submissions have to refer to one of the following topical areas:
Authors are kindly requested to submit Abstracts for the proceeding contributions before Octo-ber 31, 2014 and Peer Reviewed Papers before November 15, 2014.
Important DatesOctober 31, 2014 Abstracts due
November 15, 2014 Peer review manuscript submission
