Bil Code Department General Title1 A001 JKM Crack or Weldment Failure in Pipeline 2 A002 JKM Internal Pitted Growth In Pipeline

3 A003 JKM Improve Measurement Capability for Low Emissivity Targets

4 A004 JKMEffect of Different AQ Dosage Percentage to the Characteristics of Chemical Pulped Durian Rinds Paper

5 A005 JKMEffect of Different Pulping Time to the Characteristics of Chemical Pulped Durian Rinds Paper

6 A006 JKMEffect of Different Pulping Temperature to the Characteristics of Chemical Pulped Durian Rinds Paper

7 A007 JKM Room Absorption Tests on "Used Cooking Oil" 8 A008 JKM Acoustical Characteristics of "Pinang" fibers.

9 A009 JKMCapability of Human Hairs for Noise Absorption in Enclosed Room.

10 A010 JKMTOTAL PRODUCTIVE MAINTENANCE APPLICATION IN PALM OIL MILLREYNOLD EQUATION DERIVATION IN HYDRODYNAMIC

Resource id #3

View FKMP List

11 A011 JKMREYNOLD EQUATION DERIVATION IN HYDRODYNAMIC LUBRICATION FOR METAL FORMING

12 A012 JKM

Analysis of material behaviour on plasticity type wear: Stabilisation period. Analisa sifat bahan terhadap kehausan plastik: Fasa Stabil

13 A013 JKM

Analysis of material behaviour on plasticity type wear: Initiation period. Analisa sifat bahan terhadap kehausan plastik: Fasa Permulaan.

14 A014 JKM

Development of control interface for sliding wear test machine. Pembangunan "control interface" untuk mesin pengujian geseran.

15 A015 JKM Fracture toughness of hybrid composites. 16 A016 JKM Oblique energy absorption of hybrid composites. 17 A017 JKM Axial energy absorption of hybrid composites.

18 A018 JKM

Development of Rain Water Harvesting System for CEIES Building / Pembangunan Sistem Penuaian Air Hujan untuk CEIES Bangunan.

19 A019 JKM

Improvement of Energy Efficiency Electric in CEIES Building; Air Conditioner. / Peningkatan Kecekapan Tenaga di Bangunan CEIES ; Penyaman Udara

20 A020 JKM

Improvement of Energy Efficiency Electric in CEIES Building; Lighting. / Peningkatan Kecekapan Tenaga di Bangunan CEIES ; Pencahayaan

21 A021 JKM Biomaterial composite

22 A022 JKM Dental Implant finite element analysis 23 A023 JKM Natural fiber composite 1

24 A024 JKMFabrication of Pretension Device(axial load) to be used with High Velocity Impact Gas Gun.

25 A025 JKMFabrication of Pretension Device(axial load) to be installed on Drop Test Rig.

26 A026 JKMPrediction Elastic Properties of 5 Harness Satin Composite using Periodic Boundary Condition method.

27 A027 JKMFabrication of Al-based Functionally Graded Materials using Powder Metallurgy Routes

28 A028 JKMAlAl2Cu functionally graded materials fabricated by a centrifugal casting

29 A029 JKMCompositional Gradient Simulation for Centrifugal Slurry-Pouring Methods

30 A030 JKMDesign and Control of Flexible Link Aerator System to Generate Dissolve Oxygen in Prawn Ponds.

31 A031 JKM Design and Control of UAV System for Agricultural Purpose.

32 A032 JKMDesign and Control of Water Tank System to maintain pH and Salinity of the Prawn Ponds

33 A033 JKM Analysis of Noise and Vibration on Bogie system 33 A033 JKM Analysis of Noise and Vibration on Bogie system 34 A034 JKM Analysis of Noise and Vibration on RGB system 35 A035 JKM A study of sound absorption using SoundPro material 36 A036 JKM Mesin Pengisian Bantal 37 A037 JKM De-silicone coated pineapple paper 38 A038 JKM Analisis berkaitan sistem penternakan ikan

39 A039 JKMPengoptimuman rekabentuk kejuruteraan dengan algoritma kelawar

40 A040 JKMPengoptimuman rekabentuk kejuruteraan dengan algoritma burung tekukur

41 A041 JKMPengoptimuman rekabentuk kejuruteraan dengan algoritma pendebungaan bunga

42 A042 JKMInvestigation on physical and mechanical properties of nanocomposites

43 A043 JKM Piping flow induced vibration using finite element analysis

44 A044 JKMFracture analysis of nanocomposites using finite element analysis

45 A045 JKMThe Characterization of Unixial Tensile Test of Aluminium Alloy using different jig sizes

46 A046 JKM Modelling of Cylinder Impact Test Simulation

47 A047 JKMModelling of Uniaxial Tensile Test using Elastoplastic damage model.

48 A048 JKM Statistical analysis of acoustic properties in simulation room

49 A049 JKLAInvestigate the sound propagation in small room scale using ray-tracing method

50 A050 JKM powder metallurgy 51 A051 JKM powder metallurgy 2 52 A052 JKM Powder metallurgy 3

53 A053 JKMInvestigate the absorption coefficient of natural fibre in acoustic room

54 A054 JKMInvestigate the sound propagation in small room scale using ray-tracing method

55 A055 JKM Simulasi perubahan suhu badan manusia di dalam kiub ais

56 A056 JKM Kesan panjang galah dan sudut berbeza dalam getaran CANTAS 57 A057 JKM Pengawalan PID ke atas permodelan penukar haba

58 A058 JKMScaled-Down Model of Granular Fertilizer Boom Sprayer (Fatin Afiqah Binti Shokrun)

59 A059 JKMForm-Factor Improvement of Fully Mechanical-Driven Vending Machine (Farah Binti Mumad)

60 A060 JKM3D Real Time Motion Capture Analysis Application for Individual Sports Coaching Aid (Nur Shafiqah Ahmad Maulana)

61 A061 JKM2D Single-Camera Based Motion Analysis as Team Sports Strategic Tool (Nor Syahira Sheri Ibrahim)

62 A062 JKM Improve the quality surface of nature fibre paper based

63 A063 JKM Fatigue behavior of titanium alloy for biomedical applications

64 A064 JKMDevelopment of GUI(Graphical user interface)for scada system of ROV thruster

65 A065 JKM Installation of onboard measurement system for ROV thruster

66 A066 JKMAluminium powder metallurgy technology for high-strength applications

67 A067 JKM Fatigue Fracture 68 A068 JKM Genetic algorithm 69 A069 JKM Corrosion computational modelling

70 A070 JKMStudy of the use of Arduino and Labview for conducting engineering measurement

71 AO49 JKMTENSILE AND COMPRESSION PROPERTIES OF HYBRID COMPOSITES

72 B001 JKBRApplication of 40 Principles of TIPS towards the refinement of a Quasiturbine Pump

73 B002 JKBRDesign & Development of an Automatic Mortar & Pestle for Person with Hand Movement Disability

74 B003 JKBRApplication of Axiomatic Design Principles to the Development of a Turbine Blade

75 B004 JKBR Different anion ratio to corrosion attack 76 B005 JKBR Green corrosion inhibitor for carbon steel

77 B006 JKBRThe corrosion rate of carbon steel in seawater at different exposure angle

78 B007 JKBR Filled Polymer Composites-1 79 B008 JKBR Filled Polymer Composites-2 80 B009 JKBR Filled Polymer Composites-3

81 B010 JKBR Product design using TRIZ approach to Design for Environment 82 B011 JKBR Product design using Design for Six Sigma methodology

83 B012 JKBR Sustainable product design using Design for Six Sigma approach

84 B013 JKBR Material fabrication and characterization for water separation

85 B014 JKBR Material fabrication and characterization for oil separation

86 B015 JKBR Material fabrication and characterization for gas separation 87 B016 JKBR Extraction of Gelatine from Fish Bone

88 B017 JKBRIn Vitro test of Anodised Titanium and Hydroxyapatite in Simulated Body Fluid (SBF)

89 B018 JKBR Extraction of Gelatine from Fish Skin 90 B019 JKBR Photostability of polymer 91 B020 JKBR Acoustic of foam composites 92 B021 JKBR Acoustic of Foam 93 B022 JKBR Co-doping TiO2 via sol-gel method 94 B023 JKBR visible response TiO2 with anion doping 95 B024 JKBR visible response TiO2 with cation doping 96 B025 JKBR Alumina foams 97 B026 JKBR Ceramic composites 1 98 B027 JKBR Ceramic composites 2 99 B028 JKBR Corrosion and wear behaviour of materials 100 B029 JKBR Wear behaviour of coating materials 101 B030 JKBR Corrosion behaviour of materials

102 B031 JKBRExtraction of precious metals from e-waste using grinding and hydrometallurgical process

103 B032 JKBRExtraction of hazardous metals from e-waste using grinding and hydrometallurgical process

104 B033 JKBR

Investigation of Carbon Footprint and Carbon Payback Time for Several Electronic Product in Malaysia by Solidworks Sustainability Analysis

105 B034 JKBR Optimizations of FOFA compositions as Pigment in Paint 106 B035 JKBR Development of Zn Ferrite in paint for EMI Shielding

107 B036 JKBREffect of UV Light Treatment on Anodised Titanium (Anatase Phase) for Biomedical Application

108 B037 JKBREffect of Different Stirring Methods on Anodised Titanium for Biomedical Application

109 B038 JKBREffect of Sodium Removal Treatment on Gel Oxidation of Titanium for Biomedical Application

110 B039 JKBR Thin films for photocatalytic activity 111 B040 JKBR Thin films for optical properties 112 B041 JKBR Effect of temperature for ceramic materials

113 B042 JKBRProduction of Ceramic Product via Recycling of Glass, Plaster of Paris and Ceramic Wares

114 B043 JKBRPreparation and Characterisation of Polypropylene/Kaolin composites

115 B044 JKBRElectrodeposition of Cupronickel Alloy on Mild Steel Substrate via Single Electrolyte Method 115 B044 JKBR via Single Electrolyte Method

116 B045 JKBR Nanocarbon structure from plastic waste.

117 B046 JKBR Recycling of glass fiber from glass reinforced composites. 118 B047 JKBR Acoustic study of coated metal.

119 B048 JKBREffect of alkaline precursor solutions on nanostructured ZnO thin films synthesized through a hydrothermal method

120 B049 JKBREffect of alkaline concentration on structural of ZnO via hot water treatment

121 B050 JKBREffect of acidic concentration on structural of ZnO via hot water treatment

122 B051 JKBR Analisis Unsur Terhingga bagi Implan Gigi 123 B052 JKBR Analisis Unsur Terhingga bagi komposit fleksibel 124 B053 JKBR Heat treatment 125 B054 JKBR Metal matrix composites 126 B055 JKBR Powder metallurgy 127 B056 JKBR Reproduce PU foam for sponge jet application 128 B057 JKBR ceramic tableware for low sintering temperature 129 B058 JKBR Metal foaming for medical application 130 B059 JKBR Design of Noddle Loosening Machine 131 B060 JKBR Design of Semi Automatic Karipap Machine 132 B061 JKBR Design of Noodle Frying Machine 133 B062 JKBR Biomaterials for biomedical application

134 B063 JKBR Bioceramic for bone implant application 135 B064 JKBR Biopolymer for food packaging

136 B065 JKBRThe effect of hydrophilic particles towards phase inversed structure and performance

137 B066 JKBRComparative study of hydrophilicity and viscosity towards membrane performance

138 B067 JKBRThe effect of zeolite particles towards gas separation performance

139 B068 JKBR Electrophoretic deposition of silica 140 B069 JKBR Derived of silica from rice husk 141 B070 JKBR Synthesis of PVA beads-chitosan-silica beads

142 B071 JKBROptimization of pipe structure for condensate pump using cfd simulation

143 C001 JKPI Development of mould for rheology test sample

144 C002 JKPIThe effect of processing condition of polypropylene nanoclay towards strenght at high temperature exposure.

145 C003 JKPI

The effect of mould and clay content of injected mould polypropylene nanoclay integral hinges towards mechanical properties.Control System of Multilayer IPMC Actuator using PID

146 C004 JKPIControl System of Multilayer IPMC Actuator using PID Controller.

147 C005 JKPI Development of Small Scale Sensing AUV.

148 C006 JKPI Design and Develop Micro Ballast Tank for Small Scale AUV

149 C007 JKPIInvestigation of Vibration cutting in milling, turning, grinding, laser, EDM

150 C008 JKPIDynamics analysis of Ultrasonic Vibration Assisted Micro-milling (UVAM)

151 C009 JKPI Investigation of coolant effect on vibration machining

152 C010 JKPIInvestigation of Minimum Quantity Lubrication on vibration assisted machining

153 C011 JKPIRFID Tag Coverage Optimization using Particle Swarm Optimization (PSO) Algorithm

154 C012 JKPIOptimization of RFID Tag Coverage through Design of Experiments (DOE).

155 C013 JKPI

RFID Tag Coverage Optimization using Particle Swarm Optimization (PSO) Algorithm with Time Decreasing Inertia Weight.

156 C014 JKPIProduction improvement using Industrial Engineering tools and techniques

157 C015 JKPIA case study on the implementation of Industrial Engineering tools and techniques in a manufacturing company

158 C016 JKPI Product improvement using QFD and TRIZ methods 159 C017 JKPI Impact response on kenaf woven textile structures.

160 C018 JKPIImpact response on Kenaf tube composite using vacuum infusion making technique

161 C019 JKPIModeling analysis on unidirectional kenaf composite plate under low velocity impact.

162 C020 JKPI Printing RFID antenna on textile materials

163 C021 JKPIGeneration of three dimensional parts other than square shape using SLA (Sterelithography)

164 C022 JKPIFunctional testing on functional parts produced from SLA (Sterelithography)

165 C023 JKPI Improvement of Production Line in Food Maker. 166 C024 JKPI Automated System for Food Machine in Small Industry 167 C025 JKPI Mechanical Sturcture for Climbing Robot

168 C026 JKPI An investigation of laser-assisted machining of titanium alloys

169 C027 JKPIPerformance evaluation of bio-based lubricant for sustainable machining process

170 C028 JKPI Study on the laser micro-welding process on dissimilar material 171 C029 JKPI Ergonomics Study for Office Workstation 171 C029 JKPI Ergonomics Study for Office Workstation 172 C030 JKPI Ergonomics Study for Manufacturing Industry 173 C031 JKPI Ergonomics Study for Retail Grocery Stores

174 C032 JKPIFriction stir welding parameters optimization using Taguchi method

175 C033 JKPI Friction stir welding by structure changes in dissimilar metals 176 C034 JKPI Friction stir spot welding

177 C035 JKPIA Survey on Textile of Waste Regulations and its Recycling Facilities in The District of Batu Pahat

178 C036 JKPISurface Integrity of Inconel 718 when EDM Machining with Powder Suspended Dielectric

179 C037 JKPICompressive Strength Investigation in Recycling of Aluminum Waste Through Hot Press Forging

180 C038 JKPICase study of UTHM student transportation services as the first step to generate General Transit Feed Specification (GTFS) files

181 C039 JKPI

Case study of UTHM student transportation services as the first step to generate General Transit Feed Specification with real time monitoring (GTFS-re

182 C040 JKPICase study of new products based on waste material of tempered glass.

183 C041 JKPI Study On Soldering Lead-Free Solders Using Wave Technique

184 C042 JKPI The Effect Of Multiple Reflow Soldering On Lead-Free Solders 185 C043 JKPI The Effect Of Nickel Content On IMC Formation 186 C044 JKPI An investigation on machining bio-ceramic material

187 C045 JKPIThe effect of machining bio-ceramic material on tool wear and tool life of a cutting tool

188 C046 JKPIThe effects of cutting parameters on cutting forces when machining hydroxyapatite

189 C047 JKPI Design of customized mouth guard using QFD approach

190 C048 JKPIRapid fabrication of functional mouth guard using rapid tooling approach

191 C049 JKPIEvaluation of high performance material for customized mouth guard application

192 C050 JKPIThe Study of Recycled ABS Plastic For FDM Filament by Using Single Screw Extruder

193 C051 JKPIThe Study Of Recycled Plastic ABS For FDM Filament by Using Lyman Mini Single Screw Extruder

194 C052 JKPI Friction Stir Spot Welding on HSLA 195 C053 JKPI Parameters optimization in Spin Welding of Acrylic 196 C054 JKPI Parameters optimization in Spin Welding of Acrylic

The effect of post-weld heat treatment on the mechanical and 197 C055 JKPI

The effect of post-weld heat treatment on the mechanical and microstructure of aluminium alloy.

198 C056 JKPIThe effect of Ce on the mechanical and microstructure of Aluminium LM6 alloy.

199 C057 JKPIThe effect of La on the mechanical and microstructure of Aluminium LM6 alloy

200 C058 JKPIKajian keberkesanan proses perlaksanaan Projek Sarjana Muda di UTHM

201 C059 JKPIAnalysis of velocity effect on kenaf fiber reinforce polyester composite energy absorption properties

202 C060 JKPIAnalysis of fiber reinforced polyester composite strength variability at different alkali treatment conditions

203 C061 JKPI Productivity improvement at selected industry using IE Tools

204 C062 JKPILean Production Implementation at selected industry : A Case study

205 C063 JKPI Ergonomics Product design

206 C064 JKPIA numerical study for direct RP pattern collapsibility in investment casting process

207 C065 JKPIDirect casting part quality investigation for direct investment casting

208 C066 JKPI Shell mould process evaluation for direct investment casting

209 C067 JKPI Design of pillow filling machine 210 C068 JKPI Design of frying machine for SME

211 C069 JKPIA study on fabrication of custom foot and ankle orthoses via fused deposition modeling

212 C070 JKPIThermoplastic rubber characterization for fused deposition modeling feedstock

213 C071 JKPIA study carbon fibre reinforced plastic for fused deposition modeling feedstock

214 C072 JKPILow-cost conductive composite material for 3d printing of electronic sensors

215 C073 JKPI Analysis of task among intrastate bus driver 216 C074 JKPI The monitoring of vigilance among intrastate bus driver 217 C075 JKPI Effects of vibration on intrastate bus drivers

218 C076 JKPITo design integrated machine for pineapple leaf fibre (PALF) productions

219 C077 JKPITo produce and characterized the PALF properties for yarn productions.

220 C078 JKPITo produce woven structure from pineapple leaf fiber (PALF) based fabric

221 C079 JKPIPerformance of Weighted Idle Time Flow Shop Scheduling at Various Weight Factors 221 C079 JKPI Various Weight Factors

222 C080 JKPIMultiple Weightage Idle Time Heuristic for Flow Shop Scheduling

223 C081 JKPIArtificial Bee Colony Flow Shop Scheduling with Preset Initial Solutions

224 C082 JKPI Partial Schedule Artificial Bee Colony Heuristic for Flow Shop 225 C083 JKPI The extruding biscuits filling machine

226 C084 JKPIThe integrated dehumidifier on food drying machine seeing the effects of humidity and temperature

227 C085 JKPI Mould development with 3d printer

228 C086 JKPIApplication of mathematical Algorithm for reverse engineering process in Global environment

229 C087 JKPIImprovement of the application of Ultrasonic process in Transverification

230 C088 JKPIOptimization of surface finish quality when cutting hard metals using coated inserts

231 C090 JKPI Design improvement of a cloth drying rack 232 C091 JKPI Fabrication of cast iron ring burner by die casting

233 C092 JKPI Active Suspension for improve ride comfort for monorail. 234 C093 JKPI Active Suspension for improve ride comfort for LRT

235 C094 JKPIDynamics of train Brake System ( a. brake pad material, b. safety controller)

236 C095 JKPI Fabrication of decorative lamp stand using die casting

237 C096 JKPIAnalysis of SPC Pattern Recognition in Hard Disc Drive Manufacturing.

238 C097 JKPI Development of SPC Pattern Recognition Software 239 C098 JKPI Development of Web-Based SPC Pattern Recognition 240 D001 JKLA Thermal comfort level in Parit Raja Primary School 241 D002 JKLA Prediction of comfort zone for UTHM public transport 242 D003 JKLA Design an air conditioning system for uthm mosque 243 D004 JKLA Carbon Footprint Assesment in UTHM

244 D005 JKLAEffect of Co-Firing of Biomass Waste for Heat Generation System

245 D006 JKLA Development of Pilot Scale Waste Incinerator

246 D007 JKLA

Analysis of the implementation of fuel additive on Performance and Emissions Characteristics of Petrol Engine Fuelled by Biopetrol

247 D008 JKLAAnalysis of the Reliability Cutting Process for Endoscopic Retrograde Cholangiopancreatography (ERCP) Instrument.

248 D009 JKLAInfluences of Biodegradable Lubricant on Petrol Engine performance

249 D010 JKLA Falling film evaporation on horizontal tubes 249 D010 JKLA Falling film evaporation on horizontal tubes

250 D011 JKLA INVESTIGATION OF HEAT TRANSFER IN A MICRO-CHANNEL

251 D012 JKLAINVESTIGATION OF HEAT TRANSFER IN A PLATE HEAT EXCHANGER

252 D013 JKLA" Traffic Flow Study during Morning Rush Hour at UTHM Main Gate"

253 D014 JKLA" Traffic Flow Study during Evening Rush Hour at UTHM Main Gate"

254 D015 JKLA Traffic Flow Study during Normal Hour at UTHM Main Gate

255 D016 JKLANumerical investigation on k-epsilon method for thermal conductivity in membran fuel cell.

256 D017 JKLAFlow visualization of bubble structure for bubble column reactor in fluid mixing.

257 D018 JKLAFactal method for thermal conductivity evaluation in fuel cell application.

258 D019 JKLA Carbon Foot Print Assessment in Printing Industry

259 D020 JKLACFD Simulation of CNG-Biodiesel Dual Fuel Mixing in Engine Cylinder

260 D021 JKLAMicro Reactor for Hydrogen Generation from Steam Reforming Process

261 D022 JKLA Flame spread behavior over combine fabric 262 D023 JKLA Flame spread behavior over combustible solid

263 D024 JKLADevelopment of apparatus for conducting experiment of jet flame charateristic

264 D025 JKLA Test rig development for different gasoline fuel injectors

265 D026 JKLAPerformance study on the effects of different ambient temperatures for small gasoline engine

266 D027 JKLA Driving cycle for medium duty engine: case study of Batu Pahat 267 D028 JKLA Study on Type of Nozzle to Blasting Process 268 D029 JKLA Effect of Abrasive Media in Blasting Process

269 D030 JKLA Simulation Study on Blasting Characteristic with Different Angle

270 D031 JKLAObservations of the spark plug ignition characteristics using the direct photography technique.

271 D032 JKLAImage processing of the changes of color intensity in low cost of schlieren instrument.

272 D033 JKLAAnalysis of the ignition process and flame pattern in the constant volume chamber.

273 D034 JKLAEffect of turbulent generator to Film cooling effectiness for singgle row film cooling Study of Temperature profile for film cooling with anti vortex

274 D035 JKLAStudy of Temperature profile for film cooling with anti vortex hole

275 D036 JKLA Study of Temperature profile for film cooling with sister hole

276 D037 JKLAEffect Of Blade Geometry Parameters On Flow Pattern In A Classifier

277 D038 JKLA Investigation of wind flow around the high-rise buildings

278 D039 JKLAThe Flow Behaviour Study Of Splitting Device For Horizontal Pipeline

279 D040 JKLAHeat Load Based on Exhaust Air Flow Rates Based on Respective Used Cooking Appliances.

280 D041 JKLA Characteristic Study of Dust Spray for "Tayammum" 281 D042 JKLA Nozzle Fabrication and Development for fine spray

282 D043 JKLA Study the multiphase flow in flat spray nozzle using CFD 283 D044 JKLA Investigate the effect of mist spray on flat surface 284 D045 JKLA Study the effect of swirl in mist spray nozzle 285 D046 JKLA Incineration of Automotive Wastes: Emission Study 286 D047 JKLA Incineration of Automotive Wastes: Combustion Study

287 D048 JKLADe-lacquering of recycled Aluminum cans via heat from biomass combustion

288 D049 JKLAThree axis traverse sistem development for velocity and temperature measurement inside wind tunnel

289 D050 JKLAEffect of turbulent generator to Film cooling effectiness for film cooling with inclination angle

290 D051 JKLAEffect of turbulent generator to Film cooling effectiness for film cooling without inclination angle

291 D052 JKLAAnalysis of mixture formation and fuel properties of low quality fuel sprays

292 D053 JKLACombustion characteristics of low quality fuel using fractal-grid generated turbulence in burner system

293 D054 JKLASpray characteristics of Fractal Grid slot Injector using Computational Fluid Dynamics (CFD)

294 D055 JKLAAnalysis the relation of fuel quantity and heat release distribution during biodiesel combustion.

295 D056 JKLASimulation and modeling of mixture formation during high ambient and high injection of biodiesel combustion

296 D057 JKLASimulation and modeling of combustion characteristics under high ambient and high injection of biodiesel combustion