Performance Curves (US)

Excellence at work. Excellence in life.

4100 Series

Iron Construction Standard Clearance

There are many additional factors to consider when selecting a pump, including (but not limited to) suction conditions, temperature limitations and material compatabilities. Curve data is typical only, actual performance may vary. Consult the factory or an authorized Tuthill Pump Group representative for assistance.

Created on November 30, 2000

0.5” Std. Port SizeModel 4103/4123

There are many additional factors to consider when selecting a pump, including (but not limited to) suction conditions, temperature limitations and material compatabilities. Curve data is typical only, actual performance may vary. Consult the factory or an authorized Tuthill Pump Group representative for assistance.

Created on November 30, 2000

Iron Construction Standard Clearance

Page 2 of 8

0.5” Std. Port SizeModel 4103/4123

There are many additional factors to consider when selecting a pump, including (but not limited to) suction conditions, temperature limitations and material compatabilities. Curve data is typical only, actual performance may vary. Consult the factory or an authorized Tuthill Pump Group representative for assistance.

Created on November 30, 2000

Iron Construction Standard Clearance

Page 3 of 8

0.5” Std. Port SizeModel 4104/4124

There are many additional factors to consider when selecting a pump, including (but not limited to) suction conditions, temperature limitations and material compatabilities. Curve data is typical only, actual performance may vary. Consult the factory or an authorized Tuthill Pump Group representative for assistance.

Created on November 30, 2000

Iron Construction Standard Clearance

Page 4 of 8

0.5” Std. Port SizeModel 4104/4124

There are many additional factors to consider when selecting a pump, including (but not limited to) suction conditions, temperature limitations and material compatabilities. Curve data is typical only, actual performance may vary. Consult the factory or an authorized Tuthill Pump Group representative for assistance.

Created on November 30, 2000

Iron Construction Standard Clearance

Page 5 of 8

0.5” Std. Port SizeModel 4105/4125

There are many additional factors to consider when selecting a pump, including (but not limited to) suction conditions, temperature limitations and material compatabilities. Curve data is typical only, actual performance may vary. Consult the factory or an authorized Tuthill Pump Group representative for assistance.

Created on November 30, 2000

Iron Construction Standard Clearance

Page 6 of 8

0.5” Std. Port SizeModel 4105/4125

There are many additional factors to consider when selecting a pump, including (but not limited to) suction conditions, temperature limitations and material compatabilities. Curve data is typical only, actual performance may vary. Consult the factory or an authorized Tuthill Pump Group representative for assistance.

Created on November 30, 2000

Iron Construction Standard Clearance

Page 7 of 8

1” Std. Port SizeModel 4108/4128

Created on November 30, 2000

There are many additional factors to consider when selecting a pump, including (but not limited to) suction conditions, temperature limitations and material compatabilities. Curve data is typical only, actual performance may vary. Consult the factory or an authorized Tuthill Pump Group representative for assistance.

Iron Construction Standard Clearance

Tuthill Pump GroupUSA • United Kingdom • Chinawww.tuthillpump.com

Excellence at work. Excellence in life.

1” Std. Port SizeModel 4108/4128