+ All Categories
Home > Documents > EASY FLUSH PRO-srb · 2020. 3. 20. · > B: Provera kvaliteta proizvoda za pranje pomoći oglednog...

EASY FLUSH PRO-srb · 2020. 3. 20. · > B: Provera kvaliteta proizvoda za pranje pomoći oglednog...

Date post: 31-Jan-2021
Category:
Upload: others
View: 0 times
Download: 0 times
Share this document with a friend
2
> Pranje i hlađenje klima sistema > A/C and cooling system washing EASY FLUSH PRO UREDAJ ZA ISPIRANJE A/C I HVAC SISTEMA, SA ŠTAMPAČEM SPIN je na osnovu iskustva sa EASY FLUSH uređajem, proizveo novi EASY FLUSH PRO koji je prvi kompletno automatski uređaj za ispiranje klima i rashladnih sistema (kod vozila do 3.5 tona). Kada se EASY FLUSH PRO spoji na struju i na izvor suvog kompresovanog vazduha ili na bocu azota, korisnik treba da poveže creva na sistem i prati instrukcije koje će se pojaviti na ekranu. Potrebno je da se unesu podaci vezani za vozilo (ime vlasnika, broj tablica, broj šasije, datum) i da se pritisne ENTER da bi krenulo ispiranje. Program pokreće višeciklične serije dvosmernog ispiranja i izvlači tečnost za čišćenje na kraju ciklusa, potom suši sistem sa suvim kompresovanim vazduhom ili azotom. Proizvod za čišćenje se može nekoliko puta iskoristiti i moguća je provera njegove boje i stanja zahvaljujući oglednom staklu na panelu uređaja. Na kraju ciklusa, korisnik može da odštampa izveštaj i priloži ga uz servisni račun. AUTOMATIC DEVICE WITH PRINTER FOR WASHING A/C AND HVAC SYSTEMS Born from the experience made by SPIN with the EASY FLUSH, the new EASY FLUSH PRO is the only COMPLETELY AUTOMA TIC device for washing A/C and refrigeration systems (vehicles up to 3.5ton). Af ter connecting the EASY FLUSH PRO to the power line and to a source of dried compressed air or a nitrogen bottle, the user connects the pipes through the brackets to the (open) system and follows the instr uctions shown on the display by inputting the info about the car owner , the license plate, the chassis number (VIN), the date and by pressing ENTER to carr y out the washing. The sof tware (multilingual) performs a series of direct and inverse washes and recovers the washing liquid at the end of the cycle, then it dries the system with dried compressed air or nitrogen. The washing product can be reused several times and it is possible to check its color and status thanks to a glass ogive on the panel. At the end of the cycle the user prints (printer included) the repor t to be attached to the ser vice invoice. SPIN srl · Via Casalecchio 35/G 47924 · Rimini - ITALY tel.+39 0541 730777 · fax +39 0541 731315 · [email protected] · www.spinsrl.it Easy Flush Pro A / C S Y S T E M S EN SRB COD. 01.000.250 32 A/C FLUSHING
Transcript
  • > Pranje i hlađenje klima sistema

    > A/C and cooling system washing

    EASY FLUSH PRO

    UREDAJ ZA ISPIRANJE A/C I HVAC SISTEMA,SA ŠTAMPAČEM

    SPIN je na osnovu iskustva sa EASY FLUSH uređajem,proizveo novi EASY FLUSH PRO koji je prvi kompletno automatski uređaj za ispiranje klima i rashladnih sistema (kodvozila do 3.5 tona).

    Kada se EASY FLUSH PRO spoji na struju i na izvor suvogkompresovanog vazduha ili na bocu azota, korisnik treba da poveže creva na sistem i prati instrukcije koje će se pojaviti naekranu. Potrebno je da se unesu podaci vezani za vozilo (imevlasnika, broj tablica, broj šasije, datum) i da se pritisne ENTERda bi krenulo ispiranje.

    Program pokreće višeciklične serije dvosmernog ispiranjai izvlači tečnost za čišćenje na kraju ciklusa, potom suši sistemsa suvim kompresovanim vazduhom ili azotom.

    Proizvod za čišćenje se može nekoliko puta iskoristiti i moguća je provera njegove boje i stanja zahvaljujući oglednomstaklu na panelu uređaja. Na kraju ciklusa, korisnik može da odštampa izveštaj i priloži ga uz servisni račun.

    AUTOMATIC DEVICE WITH PRINTER FOR WASHING A/C AND HVAC SYSTEMS

    Born from the experience made by SPIN with the EASY

    FLUSH, the new EASY FLUSH PRO is the only COMPLETELY

    AUTOMATIC device for washing A/C and refrigeration systems

    (vehicles up to 3.5ton).

    After connecting the EASY FLUSH PRO to the power line

    and to a source of dried compressed air or a nitrogen bottle,

    the user connects the pipes through the brackets to the (open)

    system and follows the instructions shown on the display by

    inputting the info about the car owner, the license plate, the

    chassis number (VIN), the date and by pressing ENTER to carry

    out the washing.

    The software (multilingual) performs a series of direct and

    inverse washes and recovers the washing liquid at the end of

    the cycle, then it dries the system with dried compressed air or

    nitrogen.

    The washing product can be reused several times and it is

    possible to check its color and status thanks to a glass ogive

    on the panel. At the end of the cycle the user prints (printer

    included) the repor t to be attached to the service invoice.

    SPIN srl · Via Casalecchio 35/G 47924 · Rimini - ITALY tel.+39 0541 730777 · fax +39 0541 731315 · [email protected] · www.spinsrl.it

    Easy Flush Pro A / C S Y S T E M S

    EN

    SRB

    COD. 01.000.250

    32

    A/C FLUSHING

  • A

    B

    D

    C

    OPCIONALNO

    UKLJUČENO

    > A: EASY FLUSH PRO automatski sprovodi nekoliko ponavljajućih

    koraka za čišćenje (direktnim i povratnim) sa krajnjim oporavkom

    i sušenjem

    > Protočna pumpa 5,5 lit/min, rezervoar od 20 lit

    > A: Interaktivni višejezični softver. Dostupni jezici:

    IT/EN/HR/CZ/DK/D/F/PL/PT/RO/RU/SK/SL/ES/SW/HU

    > B: Provera kvaliteta proizvoda za pranje pomoći oglednog stakla

    > C: Štampanje krajnjih proizvoda

    > D: Bočni priključak za suvi kompresovani vazduh ili azot(dovod do maksimalno 5 bara)

    > E: Napajanje 220V

    > F: Sadrži i opremu sa adapterima (za klima sistem i sistem hlađenja)

    > Sadrži 10 litara ALPHA FLUSH (tečnosti za pranje)

    (za poručivanje šifra: 01.000.251, Alpha Flush tečnost, 10 lit)

    > Dimenzije: 59x46, 5x100 cm

    > Težina: 45 kg

    AUTOMATIC DEVICE WITH PRINTER FOR WASHING A/C

    AND HVAC SYSTEMS

    > A: EASY FLUSH PRO automatically performs several recirculating

    washing steps (direct and reverse) with final recovery and drying

    > 5,5 lt/min flow pump, 20lt tank

    > A: Interactive multi-language software. Available languages: IT/EN/

    HR/CZ/DK/D/F/PL/PT/RO/RU/SK/SL/ES/SW/HU

    > B: Quality control of the washing product through a glass ogive

    > C: Final data printing

    > D: Rear connection to dried compressed air or nitrogen (Max 5bar

    inlet)

    > E: 220V power supply

    > F: Selection of included adapters (for A/C and refrigeration systems

    > G: 10 Lt Alpha Flush (washing liquid) included

    (for orders: code 01.000.251. Alpha Flush, 10 lt)

    > Dimensions: 59x46,5x100 cm

    > Weight: 45Kg

    Cod. 01.000.188>Kit bombola di azoto-idrogeno N

    2H

    2 (95%/5%)

    950cc con il riduttore di pressione

    >Set za testiranje Azot-Hidrogenom (95%/5%) N2H

    2

    950cc sa manometrima

    F

    EASY FLUSH PRO

    E

    EASY FLUSH PRO

    Easy Flush Pro A / C S Y S T E M S

    A I R C O N D I T I O N I N G

    A/C FLUSHING

    AUTOMATSKI UREDAJ ZA ČIŠĆENJE KLIMA SISTEMA I SISTEMAZA HLADENJE SA ŠTAMPAČEM


Recommended