Msa altair pro(1)

Post on 24-Jan-2017

100 views 0 download

transcript

MSA ALTAIR ProSingle-Gas Detector

The MSA ALTAIR Pro is a reliable high - performance single gas detector with a wide range of oxygen or toxic sensors to choose from

Maintenance FreeThere is no requirement for maintenance over its 2 year lifetime making

the ALTAIR an extremely economical instrument. This instrument will

continue to perform as long as battery capacity allows. No calibration,

sensor change or battery change is needed.

Rugged DesignThe extra thick rubberised housing provides protection from accidental

drops and helps provide a tight seal, offering simple yet effective

resistance to water and dust ingress.

Plug-and-Play Sensor Operation The superior triple alarm system fitted to the ALTAIR effectively alerts the

wearer to any danger. It consists of a distinctive audible alarm of 95 dB at

30 cm, super-bright LEDs visible from a 320o angle and a strong vibration

alarm.

KEYBENEFITS• Superior dust and water protection

• Single button operation provides ease

of use

• Alarms are indicated by flashing

LEDs, audible alarm, and internal

vibrating alarm

• Great RFI performance

• Simple bump check with checkmark

for 24hours

Simple intuitive operation, small rugged design, and dependable technology

“ “

GASESANALYSED

CO H2SO2 NH3

NO2 PH3

ClO2

HCN

Cert No. 996ISO 9001

11 Ark Royal Way, Lairdside Technology Park, Tranmere, Wirral, CH41 9HTT: +44(0)151 666 8300 F: +44(0)151 666 8329 E: sales@a1-cbiss.com W: www.a1-cbiss.com Buy Online: shop.a1-cbiss.com

TECHNICALSPECIFICATION

GENERAL• Accurately measures gas concentration or percent oxygen

• Replaceable battery and sensor

• Adjustable alarm set points are offered for LOW, HIGH,

TWA, and STEL

• IP67 Ingress Protection

GASES• Oxygen 0-25% by Vol

• Carbon monoxide 0-1500 ppm

• Hydrogen sulphide 0-200 ppm

• Hydrogen cyanide 0-30 ppm

• Chlorine 0-20 ppm

• Chlorine dioxide 0-1.00 ppm

• Sulphur dioxide 0-20 ppm

• Nitrogen dioxide 0-20 ppm

• Ammonia 0-100 ppm

• Phosphine 0-5.00 ppm

• Carbon Dioxide 0-10% Vol

• Butane 0-25% Vol

• Methane 0-100%Vol

• Propane 0-100%Vol

PHYSICAL• Dimensions: 3.4” x 2.0” x 1.0”

• Weight: 4.0 oz including clip

• Case: Polycarbonate with rubberized shell

PERFORMANCE• Battery: CR2 lithium camera battery

• Run time: 9000 hour installed life - typical

CERTIFICATIONS• Ex ia IIC T4

• Class I, Div. 1, Groups A, B, C and D; Class II,

Div. 1, Group G

ORDERINGINFORMATION

Part No. Gas Range

10070791 O2 19.5/23 Vol %

10071364 O2 19.5/18 Vol %

10070750 CO 25/100ppm

10071334 CO 30/60ppm

10071336 CO 35/400ppm

10071361 H2S 5/10ppm

10070749 H2S 10/15ppm

10071363 H2S 7/14ppm

Part No. Description

467895 Regulator, 0.25 lpm

10071364 Tubing, 16” (do not use with NH3, Cl2, and CLO2)

10070750 Tubing, 16" Tygon-lined (NH3, Cl2, and CLO2)

10071334 3V CR2 battery

10071336 Clip, stainless steel